What are the characteristics of automatic filling machine. The feature of the automatic filling machine is that the empty bottles transferred from the bottle conveying line are sent to the rotary table accurately through the bottle feeding and shifting mechanism, and the empty bottles rotate immediately.

At the same time, the empty bottle is lifted by the soft support mechanism. After the bottle mouth contacts with the filling valve, the bottle is automatically opened for filling. After filling, the bottle is automatically pulled out and enters the bottle conveying line, and the whole process is completed.

The machine is equipped with automatic protection device. In case of bottle jamming, the machine will stop automatically to protect the safety of human and machine.

The leading technology of automatic filling machine lies in the following ten points:

1. High precision: when the calibration capacity is 500mm, the average error is ± 1.5ml.

2. High speed: 250-300 bottles / hour per valve, CVT.

3. Large capacity: the filling volume can be adjusted between 150-800 ml without any step.

4. Large range: it can be applied to many kinds of special-shaped bottles, and it is convenient and quick to change the bottle type.

5. No liquid damage: the bottle mouth shall be closed and filled, and the liquid shall be sprayed on the inner wall of the bottle, without hops or spillover.

6. No broken bottle: it is equipped with an elastic bottle supporting device, which is not limited by the height and height of the bottle. The bottle is not in place, does not break the bottle, and does not damage the machine.

7. Automatic protection: overload clutch protection device is set at the transfer wheel of bottle in and out, which will automatically stop and alarm in case of abnormal situation.

8. Automatic liquid level: the floating ball liquid level control device is used for liquid level control to control the stable liquid level.

9. Electric adjustment: electric synchronous continuous stepless adjustment quantitative, LCD digital display accurate display.

10. Soft start: when starting, the machine slowly rises from low speed to set speed, without rigid impulse, so it will not break the bottle and hurt the machine.

Automatic filling equipment type automatic liquid filling machine is composed of filling, upper inner plug, pressing inner plug, upper outer cover, rotating outer cover, PLC control and other main parts.

The machine is driven by cam, with accurate positioning and stable transmission. PLC automatically controls the whole process of filling, pressing inner plug, rotating cover, etc.

Automatic injection molding machine can be prepared, which can directly enter the filling system from bottle blowing to prevent cross infection. The whole process is completed under sterile conditions. There is no need to wash and dry the bottle. This machine is suitable for the filling and production of eyedrops, nose drops, ear drops, essential oils and other small dosage preparations.